2003 Nissan Sentra SE-R Spec V - Stereo Info - sentra.specv.is.fast.as.fuuck.ca

Stereo Info

Head Unit:	Kenwood eXcelon X959

Front Stage:	Amp- JL e4300
	Front 6½- JL VR650-CSi
	Rear 6½- JL VR650-CXi

Sub Stage:	Amp- Eclipse EA3422 (36401)
	Subs- Dual 10" Eclipse SW6102.4

Power:	Cap- Poweramper X-Power Digital 1.0 Farad

Head unit

Kenwood eXcelon X959

Front Stage Amplifier

JL e4300 - link

Specifications:
Rated Power (stereo):
45W RMS x 4 @ 4 ohm (12.5V);
75W RMS x 4 @ 2 ohm (12.5V)
Rated Power (bridged):
90W RMS x 2 @ 8 ohm (12.5V);
150W RMS x 2 @ 4 ohm (12.5V)
THD at Rated Power:
<0.08% @ 4 ohm (20 Hz - 20 kHz)
S/N Ratio:
>104 dB referred to rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Frequency Response:
10 Hz – 25 kHz (+0, -1dB)
Damping Factor:
>200 @ 4 ohm per ch. / 50 Hz,
>100 @ 2 ohm per ch. / 50 Hz
Slew Rate:
± 22V/µs
Input Range:
200mV – 8V RMS
Dimensions:
13.8" x 9.25" x 2.36"

Features:
Absolute Symmetry™ Class AB Circuit (U.S. Patent #6,294,959)
Differential, Noise-Cancelling Input Topology:
RCA jack inputs (low-level) and multi-pin jack (high-level)
On-board Crossover:
State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50 – 200 Hz. Configurable as Low-Pass or High-Pass
Preamp Output:
Pass-through type.
Speaker output connections:
accept up to 8 AWG wire
+12V and Ground connections:
accept up to 4 AWG wire

PDF

6½" Fronts

JL VR650-CSi - link

6.5-inch (160mm)

2-Way Component System

This component system is a direct-fit into most newer GM vehicles and a large number of European cars. Exceptional midbass output and super-smooth midrange and high-frequency response make this an exceptional value for the quality conscious car audiophile.

The VR component tweeter is a masterpiece of miniaturization and precision German manufacture. The tiny 3/4-inch (19mm) silk dome is ferrofluid cooled and housed in a super-compact housing featuring JL AUDIO's exclusive RSR mounting system. A neodymium magnet system allows for a small footprint and maximum installation flexibility of this tiny, but powerful little tweeter.

Premium mylar capacitors are employed to filter the tweeter for uncompromising high-frequency smoothness. The system-specific network is housed in a compact, outboard case and features adjustable tweeter output level and solid-state tweeter protection circuitry.

The woofer element employs a mineral-filled, injection-molded polypropylene cone body with a butyl rubber surround and is designed for smooth, unassisted upper-frequency rolloff that blends seamlessly with the tweeter's output.

Use with outboard amplification for best results.

Description: 2-way System: 6.5-inch (160 mm) Woofer; 0.75-inch (19 mm) Silk Dome Tweeter, Grilles Included
Power Handling: 60W Continuous
Recommended Amp Power: 15 - 100 Watts
Efficiency: 89.5 dB @ 1W/1m
Frequency Response: 59 Hz - 25 KHz ± 3 dB

Frame O.D.*: 165 mm
Grille Tray O.D.**: 171.4 mm
Magnet O.D.: 80 mm
Frontal Coaxial Tweeter Protrusion***: N/A
Frontal Grille Protrusion****: 21.2 mm
Xmax: 3.1 mm

*Does not take into account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from mounting surface
****Frontal grille protrusion measured from mounting surface

PDF

6½" Rears

JL VR650-CXi - link

6.5-inch (160mm) Coaxial

A premium coaxial upgrade for vehicles that accept a 6.5-inch speaker. A perfect fit for many GM cars and European cars that accept a true 6.5-inch speaker. Multiple hole patterns are incorporated into the basket for hassle-free installation into virtually all vehicles that accommodate this size speaker.

The VR coaxial tweeter is a full-size silk dome with ferrofluid cooling and a neodymium magnet for impressive output, clarity and power handling. Premium mylar capacitors are employed to filter the tweeter for uncompromising high-frequency smoothness.

Use with outboard amplification for best results.

Description: 6.5-inch (160 mm) Coaxial, Grilles Included
Power Handling: 60W Continuous
Recommended Amp Power: 15 - 100 Watts
Efficiency: 89.5 dB @ 1W/1m
Frequency Response: 59 Hz - 25 KHz ± 3 dB

Frame O.D.*: 165 mm
Grille Tray O.D.**: 171.4 mm
Magnet O.D.: 80 mm
Frontal Coaxial Tweeter Protrusion***: 15.5 mm
Frontal Grille Protrusion****: 21.2 mm
Xmax: 3.1 mm

Sub Amplifier

Eclipse EA3422 (36401) - 140W x 2 channels @ 4 ohms

Specifications
13.8V Power Supply
Max Power Output		123W x 4 ch (2 ohms)
Power Output (RMS Continuous Power)	2 ohms	70W x 4 ch
	4 ohms	50W x 4 ch
	4 ohms bridged	140W x 2 ch
THD (Rated Power)	@ 2 ohm stereo	0.008%
	@ 4 ohm stereo	0.004%
	@ 4 ohm bridged	0.008%
Signal to Noise (A-weighted 4 ohm)		105dB
Freq. Response @ 4ohm stereo 20Hz-20kHz		+0,-0.7
Crosstalk 4ohm		-70dB
Slew Rate		10V/us
Damping Factor @ 60Hz		> 200
Input Sensitivity (preout)		0.2-5V
Input Sensitivity (Amp-out)		0.4-10V
Max Current Consumption (4ohm)		50A
Channelflex Crossover
High-Pass Freq Range - 12dB/octive		50~200Hz
Low-Pass Freq Range - 12dB/octive		90Hz (fixed)
Bass Boost (@45Hz)		0~9dB
Subsonic Freq. Range - 12dB/octive		20Hz
Dimensions (W x H x D)		10.82" x 1.97" x 10.82"